A One-Piece King Electropedic Adjustable Bed, with one hand control, comes in your choice of two sizes:

• 76" x 80" Eastern King (one piece) Electropedic Adjustable Bed, and
• 72" x 84" California King (one piece) Electropedic Adjustable Bed

If you live outside of California, you will buy the Eastern King.  Usually, the One Piece King is for one person.  Most couples buy the Dual King.  Bottom Fitted Sheets for both sizes are easily available.

The Dual King Electropedic Adjustable Bed comes in your choice of two sizes:

• 76" x 80" (2--38" x 80"') Dual King Electropedic Adjustable Bed
• 76" x 84" (2--38" x 84") Dual King Electropedic Adjustable Bed  

The Dual King is usually recommended for two people, because the reason people LOVE Electropedic Beds, is that each one can adjust to every position at any time you wish.  If you have a One Piece Bed, two people cannot individually adjust.  The Dual King 76" x 80" is the standard size Kingsize Bed as the Eastern King.  (It is 6" wider, and 4" less long than a one-piece CA King).  Most people purchase the standard 76" x 80".  When you buy the Dual King, you are actually buying two Twin Extra Longs side by side.  Whether you buy a Twin Regular or Extra Long or (CA) King Length - the bending in the middle is the same (the factory just adds the extra lengths at the very top and bottom).  We recommend the 76" x 84" if the husband is over 6'1" tall.  If you are between sizes, again, we ask you if you have longer legs than normal, or if you tuck in your sheets by your feet - if you answer yes to either questions, we usually recommend the longer length.  Finding bottom fitted sheets for each side, 38" x 84" are available through Electropedic. Electropedic also, but does not usually recommend, the 72" x 84" California Dual King  2--36" x 84".  It is not usually recommended for purchase, unless you are trying to save a special headboard/footboard combination  (bottom fitted sheets for the two 36" x 84" are not to be found, unless special ordered - or you can get buy with 38" x 84" bottom sheets.) 

King   One Piece
 ONE PIECE KING ELECTROPEDIC BEDS

The Kingsize Adjustable Bed, with one hand control, comes in your choice of two sizes:  76" x 80" Eastern King (one piece) Adjustable Bed, and  72" x 84" California King (one piece)  Adjustable Bed.

Kingsize (one piece) Innerspring Electropedic Bed..

	A

If you live outside of California, you will buy the Eastern King.  Usually, the One Piece King is for one person.  Most couples buy the Dual King.  Bottom Fitted Sheets for both sizes are easily available. Kingsize Latex Foam Electropedic Beds

Model 585LM - One Piece King Electropedic Automatic Adjustable Bed and Latex Foam Adjustable Bed Mattress

Innerspring Kingsize Adjustable Bed Mattresses come in your choice of Soft, Regular Firm, Extra Firm and Ultra Firm  

Video Message from the President of Electropedic  Modem  DSL

---

Model 585 - America's Best-Built Motorized Frame

	When you buy an adjustable bed motorized frame, the basic components are the Frame, Motors, Hand Control and Casters. The Model 585 All Steel Frame supports the complete length and width of the bed (all other adjustable beds have a mini-steel frame surrounded by a box).  The Model 585 has a 25 YEAR NON-PRO-RATED GUARANTEE PARTS AND LABOR on the Frame. When you order direct from the Electropedic Factory, you are ordering direct from the address on the Guarantee Card.  You can never get better service than right from the manufacturer that makes that product (all adjustable beds sold today are serviced from the manufacturer on the Warranty Card).  If you ever need service, we are always a phone call away: 888-365-6616 Video Message from the President of Electropedic  Manufacturing Modem  DSL FRAME 25-Year Guarantee Pars and Labor High carbon steel the strongest steel available - designed to last forever Riveted joins, tension spacers.  Each moving joint is professionally riveted with tension spacers (not nuts and bolts) Metal on metal.  When flat, the steel frame that elevates the bed rests on the high carbon steel frame that never moves (does not rest on a wood base with reinforced sheet metal). Frame supports the entire bed.  The frame follows and supports each side and the complete length of the bed, providing full and complete support for the foundation and mattress, and looking exactly like a regular bed. Standard nine-inch height.  The frame sets nine inches off the floor, standard height of all regular bed frames, almost making for easy optional headboard installation. MOTORS 15-Year Warranty 2-Motors:  one for your back and one for your legs. Separate or together:  You can electrically elevate your back and your legs separately or together. Direct Drive:  The motors are installed directly into the frame.  There are not belts or plastic wheels between the frame and the motors which can break or wear down or will ever need service or lubrication. Modular-Plug design:  In case of service, Electropedic's modular plug design allows for quick and easy self-service anywhere in the world.  All wiring for each motor and optional massage unit can simply unplugged from the frame.  It should take any person without any mechanical experience less than five minutes to remove and replace a motor. Extremely reliable.  Each motor is separately tested before leaving our factory.  The service rate in the home is less than 01%. Maintenance Free.  Your motor is entirely self-contained and self-lubricating.  No oiling or greasing of the motors are ever necessary. Very Quiet.  We pay a premium to make our motors the quietest in the industry. Built-in limit switches automatically turn the motors off when the bed is in the all-the-way-up position or down position.  This protects the motors from over use and is one of the reasons they can have a 15-Year warranty. Thermal Overload Switch.  Your motors are protected from overheating and will temporarily turn off before they are damaged from overheating. Dust Covers.  We cover the screw mechanism for long-term protection against damage and noise that can be caused by dust. Higher in the back and the legs.  Electropedic has designed the Model 585 to go the very highest in the back and the legs.  The back elevates to an almost complete sitting position. Motors always concealed from view.  The motors are concealed under the middle of the bed and are not in view while bed is operating. Standard 110 outlet.  No special wiring is needed.  Just plug it in.  (220 volt systems available for outside United States.)   CASTERS 4 over-sized locking casters (Six on Queen and Kingsize) to provide lifetime support and easy mobility. Inserted directly into frame (without nuts or bolts) for the strongest connection.    HAND CONTROL Easy-to-read and easy-to-use buttons:  Head Up, Head Down; Foot Up, Foot Down. Long cord so you can adjust yourself while resting anywhere on your bed, allowing to keep hand control conveniently by your side. Either side of bed.  Hand control can be placed on either side of bed. Optional EL Remote Hand Control used Infared Technology (much better than Radio Frequency used by all other manufacturer's)   OPTIONS Optional VS Variable Speed Massage:  One Massager with two speeds and timer Optional Soft touch Massage:  Two Massagers with two speeds and timer Optional EL Remote with Dual Massagers with 7-Speeds each, timers and 4-wave programs Custom Heights and Widths Side Half-Rails Cervical, Butterfly, Memory and Latex Pillows Optional Bottom Fitted Sheets, Mattress Pads and Waterproof Mattress Pads Change of Fabric 220 Volt System QUALITY . . . Do you know how you can sometimes see quality?  The Electropedic® is the only adjustable bed that looks exactly like a regular bed.  There is a fine attention to details. The mattress stopper bar has a cover over it, the mattress stopper bar is connected to the steel frame (not just to wood - like all other adjustable bed manufacturer's), the material on the mattress is a woven material, there are dust covers on the motors, there is a layer of typar covering the bottom of the foundation, . . . After 45-years the Model 585 is the product of perfection.

 

 

Why Pay Retail?
Order direct from the Electropedic Factory
(800)551-2010

Home  Contact