Graham Field Patriot Homecare Bed
Click here for a larger image
Patriot Bed Assembly VIDEO
Patriot Homecare Beds
The Patriot Hospital Bed
motors are DC.
Here is an excellent Homecare Hospital bed. This special bed is different
than any other Homecare Hospital
bed. The deck is firm and will not give way to the weight of the pa other
beds have a spring deck which moves with the weight of the patient and has
little support. This bed as all homecare beds do only bend at the knee and
not the legs elevating. The head elevates and the bed will go from 9.5" to
20" or 13" to 23" depending how you set the casters (see specs below). This
bed is full electric with rails but it is made with head and foot boards
you cannot eliminate them. The size of the bed is 36" X 80". This is a full
This is the best quality for a
homecare hospital bed.
They also have a special attachment under the foot of the bed that you can
manually raise the legs into 3 different positions to a 15degree elevation.
This is ordered seperately and sent from the factory. The mattress that comes
with the bed is a Foam. The bed is made in the USA and is the best quality
that you can find.
When the head is elevated you need to slightly raise the legs to put a bend
into the bed and take the pressure off of the back and the hips and will
also keep the patient from sliding down in the bed.
Introducing the new Patriot Full-Electric Homecare Bed with a grid
Designed and engineered by the same team who develop the GF Long Term Care
Sleep surface is MADE IN THE USA!
The single-motor design homecare bed is now available in a
full-electric/low version. The Patriot Full-Electric Homecare Bed offers
the same features as the Patriot Semi-Electric Homecare Bed with the
additional feature of electric height adjustment. This makes it easier for
caregivers to raise and lower the bed for patient care and linen changes.
The electric height adjustment also enables the patient to easily position
the bed for maximum comfort. The Full electric homecare model
can be adjusted to be a conventional height homecare bed OR a low bed for
better inventory management!
Patriot Home Care Bed
Total assembled bed weighs only 178 pounds (bed and motor).
Powerful DC motor for effortless height adjustment.
Hi-Lo motor comes pre-installed on foot section for easy
set-up and disassembly.
All functions fully-integrated into convenient
Welded motor-guard protects motor and universal joint from damage during
shipment and deliveries.
Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic
Designed to meet the requirements of applicable HCPCS codes.
Maximum patient weight 350 lbs.
450 lb evenly distributed total weight capacity including patient, mattress,
rails, and accessories.
Casters in Low Position:
Min. 9.5", Max. 20" (at deck level)
Casters in Standard Position:
Min. 13", Max. 23.5" (at deck level)
Overall Bed Size: 87" L x 36" W.
Lift Range: Head - 60°, Knee - 30°.
No external pinch points!
Slots in frame to ensure proper rail placement.
Locking pins secure bed ends to sleep deck. Attached lanyards prevent loss
while moving or storing.
Only homecare bed to offer a 4-inch extension kit that can extend either
the head, foot, or both head and foot decking. Bed length will be 84" with
one kit, 88" with 2 kits.
The only homecare bed to offer optional corner mattress retainers.
Grid Deck offers the following advantages:
Much stronger frame.
Better mattress support.
No spring sag or bottoming out with heavier patients.
Easier to clean.
No connecting links or springs to lose.
Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare
bed when the bed is used as a Low Bed. You would be unable to lower the rail
Half-Rail B (GF6580A-1) can be used on the Full-Electric Patriot homecare
bed when used at conventional height or as a low-bed.
Two year warranty for defects in workmanship and materials of mechanical
components, frame, and electronics.
During the warranty period, defective items will be repaired or replaced
at manufacturers option. The warranty does not include any labor charges
incurred in replacement part(s) installation or any associated freight or
shipping charges to the manufacturer.
Bed shipped in three cartons:
1. Foot section and motor.
2. Head section and Hi/Lo rod.
3. Bed end set.
SERVING ALL USA
Atlantic City, NJ
Bar Harbor, ME
Baton Rouge, LA
Beaumont/Pt. Arthur, TX
La Crosse, WI
Lake Charles, LA
Lake Havasu City, AZ
Lanai City, HI
Las Vegas, NV